Trouble Events - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

IntelliKnight 5820XL Installation Manual

7.6.3.1 Trouble Events

You can map certain system trouble events to an output group. To access the screen for
selecting output groups and cadence patterns for system trouble events.
6. Press for Trouble Events. A screen similar to the one in Figure 7-14 will display. Select
1
a group and a cadence pattern for each event as needed for your application. The U: field
is for a user-specified trouble condition. You can program an output group and cadence
pattern for any of the following events:
Battery
Gnd Flt
Phone Ln
Account
Printer
Aux Pwr
Sys Sw
Group Tr
SBUS Com
SBUS Pwr
SLC Loop
AC Loss
Figure 7-14 System Trouble Event Mapping Example
7-36
Low battery condition.
Ground fault.
Phone Line 1 or 2 trouble.
Account trouble; cannot report to account.
Printer trouble. (Currently not supported; do not select.)
Auxiliary power trouble.
Trouble with a system switch.
Trouble with an output group.
SBUS communication trouble.
SBUS power trouble.
Trouble on the SLC loop.
AC power lost.
firealarmresources.com
151209