Table of Contents
Advertisement
IntelliKnight 5820XL Installation Manual
8.4.2
Using the Menus
To move through the menus:
To select an option:
8.5
Basic Operation
8.5.1
Setting Time and Date
1. From the Main Menu, select
2. Make changes in the fields on the screen. Use
Use the
and
3. When the date and time are correct, press
8.5.2
Disable / Enable a Point
1. From the Main Menu, select
2. Select
for Disable/Enable Point. A list of modules displays.
1
3. Use
and
to move through the list. Press
point you want to disable/enable is located. A description of the point should display. The
fourth line of the screen should show "NORMAL" (meaning that the point is currently
enabled) or "DISABLED" (the point is currently disabled). Press to toggle between NOR-
MAL and DISABLE.
8.5.3
Disable / Enable NACs by Group
1. From the Main Menu, select
2. Select
to Disable NACs by group or
1
3. Use
and
to move through the list of groups. Press
lighted.
8-4
and
Use
to move through the options in a menu. Use to move to a
previous menu.
Enter the number of the option.
–OR–
ENTER
Press
(Enter key) if the option appears at the top of the menu (= symbol
displays after the option number in this case).
for Set Date and Time.
4
to select options in the fields.
ENTER
for Point Functions.
2
for point functions.
2
to Enable NACs by group.
2
firealarmresources.com
(right arrow) to move through the fields.
.
to select the module where the
ENTER
to select the group high-
ENTER
151209
Advertisement
Table of Contents
Troubleshooting
