System Alarm Cadence - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

7.6.3.2 System Alarm Cadence

Fire drill and system auxiliary alarm events can have special cadence patterns to distinguish
them from other types of alarms. See Section 7.3.1.4 for available cadence patterns.
A typical use of the System Aux1 and Aux2 patterns is to distinguish fire emergencies from
other types of emergencies. The System Aux1 and Aux2 alarms would be triggered by a
system-wide switch.
To access the screen for selecting output groups and cadence patterns for system trouble
events:
1. Enter the installer code.
2. Press to display the main menu.
or
3. Select for Program Menu.
7
Display reads:
4. From the Program Menu, select
5. From the System Options Menu, select
6. Press for System Alarm Cadence.
2
A screen similar to the one in Figure 7-15 will display. Select a cadence pattern for these
special events if required for your application.
Figure 7-15 Special Cadence Patterns for Fire Drill and Auxiliary Alarm Events
151209
Initializing
Please wait . . .
for System Options.
5
for Sys. Event Outputs.
2
firealarmresources.com
Programming
7-37