I/O Point Control - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

IntelliKnight 5820XL Installation Manual

10.3.3 I/O Point Control

This feature allows you to toggle any output on or off and trip any input device. This can be
useful to test a point's output mapping.
Follow these steps to control a I/O point:
1. Select (Point Functions) from the Main Menu.
2
2. Select (I/O Point Control).
6
3. Select the Module the point is on.
4. Enter the zone number , or press the
then press .
5. Press to generate an alarm for an input point or activate an output point.
6. To exit press .
10-6
or arrow to select the point you wish to test,
firealarmresources.com
151209