Table 20. +Ccwa Parameters - Motorola g20 Developer's Manual

AT Commands Reference
The following table shows the +CCWA parameters
<Parameter>
<n> Enables/disables the call waiting indication to the terminal
by the g20.
0
1
The default is 0.
<mode> Call waiting service request to the network. When the
<mode> parameter is not given, the network is not
interrogated.
0
1
2
The default is 0.
<class> Sum of integers each representing a class of information.
1
2
4
The default value is 7.
<"number"> Calling line number. The number format is specified by
<type>.
<type> Type of address octet in integer format:
145
129
128
<status> Call waiting support by the network (output for <mode>=2).
0
1
<"alpha"> Name of the calling party (if provided by the network or if
the number is found in the g20 phone books).
When the parameter <mode> is 2 (Query status), the first parameter is ignored and the third parameter is always
treated as class = 7.
Note
66
.

Table 20. +CCWA Parameters

Description
Disable
Enable
Disable
Enable
Query status
Voice (telephony)
Data (refers to all bearer services)
Fax (facsimile services)
Default when the dialing string includes the
international access code character "+".
Default when "+" is not used in the dialing string.
The type of number format is "unknown" - no
international access code is used.
Type of number is unknown (usually the output
when the number itself is unknown)
Not active
Active
98-08901C68-O