Table 71. +Mcwake Parameters - Motorola g20 Developer's Manual

AT Commands Reference
Example
AT&D?
&D: 2
OK
AT&D1
OK
4.7.1.11 +MCWAKE, GPRS Coverage
This command tells the g20 whether to report on the status of the GPRS coverage. There are three possibilities:
• Do not report on the status of the GPRS coverage
• Report only when the GPRS coverage goes off.
• Report only when the GPRS coverage goes on.
Set Command
Command
AT+MCWAKE=<param>
Read Command
Command
AT+MCWAKE?
Test Command
Command
AT+MCWAKE =?
The following table shows the +MCWAKE parameters.

Table 71. +MCWAKE Parameters

<Parameter>
<param> 0
1
2
The default value is 2.
156
OK
+MCWAKE: <param>
OK
+MCWAKE: (0-2)
OK
Description
Sends no indication.
Sends an indication when GPRS coverage goes off.
Sends an indication when GPRS coverage goes on.
Response/Action
Response/Action
Response/Action
98-08901C68-O