Table 83. +Clck Parameters - Motorola g20 Developer's Manual

The following table shows the +CLCK parameters.
<Parameter>
<fac> SC
FD
AO
OI
OX
AI
IR
AB
AG
AC
<passwd> String type, 4-8 character password
<mode> 0
1
2
<class> Sum of integers, each representing a class of information
<class>. Only applies to call barring related facilities.
1
2
4
The default value is 7.
<status> 0
1
Example
AT+CLCK=?
+CLCK: ("SC","AO","OI","OX","AI","IR","AB","AG","AC","FD")
OK
AT+CLCK="SC",2
+CLCK: 0
OK
98-08901C68-O

Table 83. +CLCK Parameters

Description
SIM Card PIN setting
<mode> 0 Disable PIN
1 Enable PIN)
SIM Fixed Dialing memory setting
<mode> 0 Disable fixed dialing feature
1 Enable fixed dialing feature)
BAOC (Bar All Outgoing Calls)
BOIC (Barr Outgoing International Calls)
BOIC-exHC (Barr Outgoing International Calls
except to Home Country)
BAIC (Barr All Incoming Calls)
BIC-Roam (Barr Incoming Calls when Roaming
outside the home country)
All Barring services (applicable only for <mode>=0)
All outgoing barring services (applicable only for
<mode>=0)
All incoming barring services (applicable only for
<mode>=0)
Unlock
Lock
Query status (<passwd> does not apply)
Voice (telephony)
Data (refers to all bearer services)
Fax (facsimile services)
Inactive
Active
AT Commands Reference
179