Table of Contents
Advertisement
Product Features
AT
Command
+MIPSEND
This command causes the g20 to transmit the data that the terminal provides, using
an existing protocol stack.
+MIPPUSH
This command causes the g20 module to push the data accumulated in its
accumulating buffers into the protocol stack.
+MIPFLUSH
This command causes the g20 module to flush (delete) data accumulated in its
accumulating buffers.
+MIPRCV
This command causes the g20 to send unsolicited events to the DRT when it detects
that data has arrived on the protocol stack.
+MIPSTAT
This command sends an unsolicited event to the terminal indicating a change in link
status.
+MIPXOFF
An unsolicited event that the g20 sends to the terminal to stop sending data.
+MIPXON
An unsolicited event that the g20 sends to the terminal when the g20 has free
memory in the accumulating buffer.
28
Table 3. AT Commands (Continued)
Description
Page
253
254
255
257
257
258
258
98-08901C68-O
Advertisement
Table of Contents
