Table of Contents
Advertisement
AT Commands Reference
Example
AT+MAMUT=2,0
OK
AT+MAMUT=5,1
OK
AT+MAMUT?
+MAMUT: 1,1
+MAMUT: 2,0
+MAMUT: 4,1
AT+MAMUT=?
+MAMUT: (1-7),(0,1)
OK
4.9
ACCESS
4.9.1
Access Control Commands
When the phone or SIM card is locked or blocked, the only accessory operations allowed are those found in the list of Core AT
commands (allowed while phone/SIM card is locked), shown in "Core AT Commands" on page 36. All other AT commands
are not executed, for example, accessing phone book entries. However, the phone is still capable of sending asynchronous
message events via AT responses, for example, incoming call notification.
4.9.1.1
A/, Repeat Last Command
This command repeats the last command. It is not necessary to press <Enter> after this command.
Execute Command
Command
A/
170
//Accy=2 (headset mic), state=0 (unmute)
//Accy=5 (mic + Digital RX), state=1 (mute)
//Accy=1 (mic), state=1 (mute)
//Accy=2 (headset mic), state=0 (unmute)
//Accy=4 (Digital RX), state=1 (mute)
Response/Action
Repeats last command
98-08901C68-O
Advertisement
Table of Contents
