Table 136. Mipstat Parameters - Motorola g20 Developer's Manual

AT Commands Reference
The following table shows the MIPSTAT parameters.

Table 136. MIPSTAT Parameters

<Parameter>
<n> 1
2
4.15.2.10 MIPXOFF, Flow Control - Xoff
This command is the unsolicited response that the g20 sends to the terminal to stop sending data when it does not have enough
memory to process new +MIPSEND requests. The g20 uses the accumulating buffer prior to pushing data into the protocol
stack. This memory resource is protected by a Xoff_upper watermark.
Example
Event
+MIPXOFF: <Socket ID>
+MIPXOFF:
4.15.2.11 MIPXON, Flow Control - Xon
This command is the unsolicited event that the g20 sends to the terminal when it detects that it has free memory in the
accumulating buffer and can process new +MIPSEND requests, after the +MIPXOFF event.
Event
+MIPXON: <Socket ID>
Example
+MIPXON: 1
258
Description
Broken protocol stack.
Broken call. All sockets that use the link fail too.
//The g20 detects that the accumulating buffer 1 has reached its Xoff watermark.
From this point, the terminal is not allowed to send data, until it receives the
+MIPXON command.
//The g20 pushed the data into the protocol stack on socket 1 and is able to handle more
data from the terminal.
98-08901C68-O