Table 50. +Cnmi Parameters - Motorola g20 Developer's Manual

AT Commands Reference
Read Command
Command
+CNMI?
Test Command
Command
+CNMI=?
The following table shows the +CNMI parameters.
<Parameter>
<mode> 0
3
<mt> 0
1
2
<bm> 0
2
Note: The CBM of "multipage" SM and "Quick view" are not
supported.
<ds> 0
<bfr> 0
Example
AT+CNMI=?
+CNMI: (0,3),(0-2),(0,2),(0),(0)
OK
126
+CNMI:<mode>,<mt>,<bm>,<ds>,<bfr>
+CNMI: (list of supported <mode>s), (list of supported
<mt>s), (list of supported <bm>s), (list of supported
<ds>s), (list of supported <bfr>s)

Table 50. +CNMI Parameters

Description
Buffer unsolicited result codes in the g20
Forward unsolicited result codes directly to the
terminal
No SMS-DELIVER indications are routed to the
terminal
If SMS-DELIVER is stored in the g20, the memory
location indication is routed to the terminal using the
unsolicited result code: +CMTI: <mem>,<index>
SMS-DELIVER is routed directly to the terminal using
the unsolicited result code:
+CMT:<oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,
<dcs>,<sca>,<tosca>,<length>]<CR><LF><data>
No CBM indications are routed to the terminal
New CBMs are routed directly to the terminal using the
unsolicited result code:
+CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR>
<LF><data>
No SMS-STATUS reports are routed to the terminal
Response/Action
Response/Action
98-08901C68-O