Table of Contents
Advertisement
AT Commands Reference
Set Command
The Set command enables or disables the presentation of the CLI indication from the g20 to the terminal.
Command
AT+CLIP=<n>
The Set command does not address the network.
Note
Read Command
The Read command returns the +CLIP enable/disable state in the g20 as well as in the network provisioning state of the CLI
presentation.
Command
AT+CLIP?
Test Command
The Test command returns the Set command options (0,1).
+CLIP Indication
When the CLI presentation indication is enabled by the g20 (<n>=1), this unsolicited indication is sent to the terminal after the
RING indication.
Indication
+CLIP:<number>,
<type>[,
<subaddr>,
<satype>[,[
<alpha>][,
<CLI validity>]]]
62
Response/Action
OK
Response/Action
+CLIP: <n>, <m>
98-08901C68-O
Advertisement
Table of Contents
