Table 62. +Cgreg Parameters - Motorola g20 Developer's Manual

4.6.1.4 +CGREG, GPRS Network Registration
Set Command
The Set command controls the presentation of an unsolicited result code "+CGREG:" and the result of the Read operation.
Command
AT+CGREG=[<n>]
Read Command
The Read command returns the status of the result code presentation and shows whether the network has currently indicated the
GPRS registration of the g20. Location information elements <lac> and <ci> are returned only when <n>=2 and the g20 is
registered in the network.
Command
AT+CGREG?
Test Command
Command
AT+CGREG=?
The following table shows the +CGREG parameters.
<Parameter>
<n> 0
1
2
The default is 0.
98-08901C68-O
OK
or:
+CME ERROR: <err>
+CGREG: <n>,<stat>[,<lac>,<ci>]
OK
or:
+CME ERROR: <err>
+CGREG: (list of supported <n>s)
OK

Table 62. +CGREG Parameters

Description
Disables the network registration unsolicited result
code.
Enables the network registration unsolicited result
code +CGREG: <stat>.
Enables the network registration and location
information unsolicited result code
+CGREG:<stat>[,<lac>,<ci>].
Response/Action
Response/Action
Response/Action
AT Commands Reference
141