4.12.1.8
+CGPRS, GPRS Coverage
This command indicates whether there is GPRS coverage.
Execute Command
The Execute command returns the mode of the GPRS coverage.
Command
AT+CGPRS
Read Command
The Read command returns the mode of the GPRS coverage.
Command
AT+CGPRS?
The following table shows the +GPRS parameters.
<Parameter>
<mode>
0
1
There is no parameter default value.
Example
Without GPRS coverage
AT+CGPRS
+CGPRS: 0
OK
AT+CGPRS?
+CGPRS: 0
OK
98-08901C68-O
+CGPRS: <mode>
OK
or:
+CME ERROR: <err>
+CGPRS: <mode>
OK
or:
+CME ERROR: <err>
Table 111. +GPRS Parameters
Description
No GPRS coverage
GPRS coverage
Response/Action
Response/Action
AT Commands Reference
225