Table of Contents
Advertisement
AT Commands Reference
4.4.1.7
+MPBW, Write Extended Phone Book Entry
This command enables the accessory to store a new entry in the phone book, or to delete an existing entry from the phone book.
An entry can be stored in a particular location in the phone book, or in the next available location.
This command differs from the GSM 07.07 "+CPBW" command in that it accepts the input from several extra fields, including
phone type, voice tag and index, alert tone, backlight, is_primary field, category and profiling icon.
Additionally, this command can be used to associate the first name and last name attributes with the record. This data is used by
SyncML.
In mailing lists, the <number> field specifies a list of speed dial numbers corresponding to other phone book
entries. Refer to "+MPBR, Read Extended Phone Book Entries", page 98, for further details.
Note
In mailing lists, only the following fields apply: <index>,<number>,<type>, <text>, <ph_type>,<voice_tag> and <category>.
All the other fields are ignored.
Email addresses cannot contain the `#' character.
Profiling icons, categories and mailing list features are not supported on all platforms.
Some versions of this command return a boolean value for the voice tag indicating whether it is present or not. Other versions
return a range (0-21) indicating its location.
Refer to the corresponding +MAID bits to determine specific behaviors for each of these features on different implementations.
Set Command
Command
+MPBW=[<index>][,<number>
[,<type>[,<text>[,<ph_type>
[, <voice_tag>[,<alert_tone>
[,<backlight>[,<is_primary>
[,<category>[,<profiling_icon>
[,<first_last_enabled>,
<sub_field_index>]]]]]]]]]]]
The following table shows the +MPBW parameters.
<Parameter>
<index>
Index for a given phone book entry
<index1>
<index2>
<index range>
Range of phone book indices
<number>
A phone number, unless:
If ph_type is "Email", it is an Email address.
If ph_type is "Mailing list", it is a set of speed dial numbers.
108
OK
or:
CME ERROR.
Table 38. +MPBW Parameters
Description
Response/Action
98-08901C68-O
Advertisement
Table of Contents
