Table 104. +Cgclass Parameters - Motorola g20 Developer's Manual

AT Commands Reference
Test Command
The Test command is used for requesting information on the supported GPRS mobile classes.
Command
AT +CGCLASS=?
The following table shows the +CGCLASS parameters.

Table 104. +CGCLASS Parameters

<Parameter>
<class> String parameter that indicates the GPRS mobile class
B
Example
AT+CGCLASS=?
+CGCLASS: (B)
OK
If a SIM card without GPRS allowed is used:
at+cgclass=?
Note
+CGCLASS: (CC)
4.12.1.2 +CGDCONT, Define PDP Context
This command specifies the PDP (Packet Data Protocol) context.
In some cases, the command passes even when the syntax is incorrect.
Note
Set Command
The Set command specifies the context identification parameter values for a PDP context. A special form of the Set command,
+CGDCONT= <cid> causes the values for context number <cid> to become undefined.
Command
AT+CGDCONT=[<cid>
[,<PDP_type>[,<APN>
[,<PDP_addr>[,<d_comp>
[,<h_comp>[,<pd1> [,...[,pdN]]]]]]]]]
212
+CGCLASS: (list of supported <class>s)
OK
or;
+CME ERROR: <err>
Description
Class B
//note that CC is a not supported value.
OK
or:
+CME ERROR: <err>
Response/Action
Response/Action
98-08901C68-O