Modules Removal Instruction - Bunn Fast Cup Series Service & Repair Manual

Brew Module
- Removal Instructions
1
Turn off main water supply and disconnect power and
water going to the brewer.
2
a
Open lower (a) and upper (b) front doors.
4
Remove 4 thumb screws securing the inner front panel.
b
3
Remove drip tray (a) and grounds bin (b).
5
Locate the upper piston tubes, disconnect 2 tubes at
the "Y" fitting.
NOTE: One tube already shown disconnected
from "y" fitting.
117
b
a
Continued >