Bunn Fast Cup Series Service & Repair Manual page 120

6
Below the Chiller assembly, remove the slotted screw
securing the chiller bracket.
8
The chiller module is free enough where you can swing
the module out of the machine and disconnect the
remaining tube that comes from the door nozzle.
7
e
Grab Chiller Assembly and gently lift upwards to free the
bracket from the upper key lock screws. Slightly move
assembly outward enough so you can easily disconnect
the coffee tube at the chiller coffee solenoid valve inlet
elbow fitting (e). NOTE: See pictorial for exact location.
9
Disconnect all wires from quantity 3 Chiller solenoid valves.
NOTE: Document wire harness color to each solenoid valve.
Front
View
120
Rear
View