Bunn Fast Cup Series Service & Repair Manual page 53

LOWER FRONT PANEL
Volt/Ohm Meter - Continuity Check
Step 10: Place grounds bin in corresponding
position - Meter should show continuity
0.00 on display or here audible tone.
Grounds Bin Removed - Meter should
show infinite or open circuit.
Step 11: If grounds bin switch shows infinite all the
time regardless positioning of magnet near
switch - Replace the grounds bin switch.
PART RELATES TO THE FOLLOWING SYMPTOMS
• Cannot start a brew process
• Message - Grounds Bin Has Been removed
• Active Notice - E-131: Grounds Bin Sensor Error
SERVICE
OPTIONAL
53
7
7
9