Bunn Fast Cup Series Service & Repair Manual page 123

Solenoid Valve Module
1
Turn off main water supply and disconnect power and
water going to the brewer.
2
Use Chiller Module removal instructions to remove the
Chiller module from the brewer.
4
Disconnect tube at the brew pump inlet elbow fitting.
- Removal Instructions
123
3
Disconnect Finish Tank outlet tube from the outlet
elbow fitting.
5
The tube coming off the top of the flow meter outlet fitting
going to a "T" connection before the pressure transducer
needs to be disconnected at the "T" fitting.
Continued >