Upper Door Cover - Bunn Fast Cup Series Service & Repair Manual

UPPER DOOR COVER WITH
TOUCHSCREEN REMOVAL INSTRUCTION
Upper Door Cover Removal Instructions
Step 1: Open lower door.
Step 2: Open upper door until right hinge locks
upper door in upward position.
Step 3: Remove left side panel.
Step 4: a) Access dispense nozzle tube under
upper door.
b) Disconnect dispense tube from
the 90° push-in elbow fitting
Step 5: a) Access door cable 8 pin
connector/harness.
b) Disconnect door cable 8 pin
connector/harness.
Step 6: Remove bushing from frame to ease
removal of the door cable with 8 pin
connector and dispense tube.
Step 7: Upper door in upward position, remove
8 philip head screws securing door cover
to the metal back plate.
Step 8: Locate 2 metal tabs on the back plate going
into the slots on the door cover.
Gently flex the door cover by the metal tabs
to release door cover from the metal
back plate.
SERVICE
6
28
5a
4a
3
2
1
4b
5b
8
Continued >
7