Bunn Fast Cup Series Service & Repair Manual page 119

Coffee Chiller Module
1
Turn off main water supply and disconnect power and
water going to the brewer.
2
c
a
Open lower (a) and upper (b) front doors.
Remove left side panel (c) to access Chiller Module and
plumbing connections.
4
d
c
Disconnect the drain tube at the chiller coffee outlet
solenoid 3 way valve (c). Disconnect the drain tube at
the chiller ambient drain solenoid valve (d).
See Rear View Pictorial for exact location.
- Removal Instructions
b
3
b
Disconnect the ambient water line going to the chiller inlet
fitting (a) and the outlet fitting (b).
See Rear View Pictorial for exact location.
5
Above the Chiller assembly, loosen the 2 slotted screws
securing chiller bracket.
119
a
Continued >