Top Panel - Bunn Fast Cup Series Service & Repair Manual

TOP PANEL REMOVAL INSTRUCTIONS
Top Panel Parts
A. Qty-3 Coffee Bean Hopper Assembly.
*Lid
*Finger Guard
*Magnet
*Hopper Gate/Lock
B. Top Panel.
C. Grommet - Tablet Inlet.
D. Qty-3 Hopper Detect Reed Switch.
E. Qty-3 Coffee Bean Detect Full/Empty Sensor.
Steps
1. Remove all bean hoppers.
2. Remove 4 slotted screws from top panel.
3 Lift top panel from right rear corner, disconnect
the wiring harness at the 4 pin connector.
4. Remove top panel.
Accesses
Hopper detect reed switch, coffee bean detect.
SERVICE
B
E
35
A
B
A
Lid
Finger Gard
Magnet
Gate/Lock
C
D