Modes Of Operation - Renishaw XK10 Manual

XK10 Hardware XK10 Hardware XK10 Software
Flatness Level

Modes of operation

Wired and charging
The S unit and M unit are charged by the display unit when connected by the
cable, as shown below.
22 XK10 alignment laser system
XK10 Applications Straightness
Parallelism Coaxiality
Squareness
Spindle direction
Wireless operation
Wireless modules will only connect when a measurement program is active.
The wireless module serves as an on/off switch for the S unit and M unit.
www.renishaw.com/xk10