Renishaw XK10 Manual page 134

XK10 Hardware XK10 Software
Flatness Level
Data capture – 9-12-3
Rotate the shafts so that the S unit and M unit are orientated upwards.
Select the '9-12-3' method.
134 XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Coaxiality Coaxiality
Rotate both the S unit and the
M unit until they align with the
9 o'clock position. Capture the
first point.
Squareness
Spindle direction
NOTE: If rotating by hand, aim for < 2 degrees angular difference
between the S unit and the M unit. If rotating under machine
control, match the position of both spindles on the controller.
Repeat to capture the
12 o'clock position.
Capture the second point.
Repeat to capture the
3 o'clock position.
Capture the final point.
www.renishaw.com/xk10