Table of Contents
Advertisement
XK10 Hardware
XK10 Software
Flatness
Level
Set-up
1
If making adjustments to machine
squareness, identify which axis
can be adjusted. This would be
axis 2 in the software.
4
Select the 'Squareness' mode on
the display unit.
66
XK10 alignment laser system
XK10 Applications
XK10 Applications
Straightness
Parallelism
Coaxiality
2
LASER
LASER
LASER
LASER
LASER
LASER
LASER
2
2
2
2
2
2
2
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AXIS 1
Mount the launch unit so that
the fixed beam travels along the
reference axis (axis 1) and the
sweeping beam travels along
axis 2.
5
Input the distances for A to B and
C to D. Select the green arrow.
Squareness
Squareness
Spindle direction
3
D
C
LASER
LASER
LASER
LASER
LASER
LASER
LASER
2
2
2
2
2
2
2
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
AXIS 1
Using the supplied tape measure,
measure the distance between
the first and last measurement
positions for A to B and C to D.
6
LASER
LASER
LASER
LASER
LASER
LASER
LASER
2
2
2
2
2
2
2
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
AVERAGE POWER <0.6 mW. PULSE ENERGY < 20nJ.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
PULSE DURATION 10-17 us. WAVELENGTH 630-680 nm.
Mount the M unit at the first
measurement position for axis 1.
NOTE: When first
using the 'Squareness'
mode, a prompt to
input the 'squareness
compensation value'
will appear. Refer to the
calibration certificate for
this value.
A
B
AXIS 1
AXIS 1
www.renishaw.com/xk10
Advertisement
Table of Contents
