Renishaw XK10 Manual page 124

XK10 Hardware XK10 Software
Flatness Level
Alignment – fine axis alignment
1
|| = 0.02 mm/m (mils/inch)
13. Zero the laser reading.
124 XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Parallelism Coaxiality
2
|| = 0.02 mm/m (mils/inch)
14. Move the M unit to the last
position on the reference
rail. Rotate the sweeping
beam so that the H value
is ±1 mm. Adjust the V
value within the alignment
tolerance.
Squareness
Spindle direction
3
|| = 0.02 mm/m (mils/inch)
15. Move the M unit
to the first position on the
measurement rail. Rotate the
sweeping beam so that the H
value is ±1 mm. Adjust the V
value within the alignment
tolerance.
2
1
3
|| = 0.02 mm/m (mils/inch)
16. Repeat the alignment process
until the vertical alignment at
all three points is within the
alignment tolerance.
www.renishaw.com/xk10