Renishaw XK10 Manual page 112

XK10 Hardware XK10 Software
Flatness Level
Pentaprism set-up for measurement rail
32. Move the M unit to
the measurement
rail, making sure the
M unit top side is
pointing in the same
direction as for the
measurement on the
reference rail.
33. Move the pentaprism
to a suitable place
to ensure the output
aperture of the
pentaprism is in line
with the M unit.
34. Slide the mirror/
target over the input
aperture of the
pentaprism.
35. Position the
pentaprism so that the
beam from the launch
unit hits the centre of
the target/mirror.
112 XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Parallelism Coaxiality
Squareness
Spindle direction
www.renishaw.com/xk10