Renishaw XK10 Manual page 72

XK10 Hardware XK10 Software
Flatness Level
Data
capture
1
Move the M unit to measurement
NOTE: See page
position A. Switch to the fixed beam
73 for the axis
and translate the M unit to within ±1
diagram.
mm of the centre of the PSD.
4
Switch to the sweeping beam.
72 XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Coaxiality
2
H
H
Capture data by pressing the
orange button on the display unit.
5
Move the M unit to position C and
translate it to within ±1 mm of the
centre of the PSD. Capture data.
Squareness Squareness
Spindle direction
3
Move to position B
and capture data.
H
6
H
Move to position D
and capture data.
www.renishaw.com/xk10