Renishaw XK10 Manual page 50

XK10 Hardware XK10 Software
Flatness Level
Mounting the hardware – best practice
Check that the tilting plate
is in the central position.
Check that the launch unit
and receiver are square
to each other.
50 XK10 alignment laser system
XK10 Applications XK10 Applications Straightness Straightness
Parallelism Coaxiality
Adjustments can be made to
the tilting plate using the pitch/
yaw adjusters.
Adjust the M unit until it is
square with the launch unit.
Squareness
Spindle direction
|| = 0.02 mm/m (mils/inch)
Adjust until the tilting plate is in
the nominal position.
www.renishaw.com/xk10