Renishaw XK10 Manual page 79

XK10 Hardware XK10 Software
Flatness Flatness Level
Alignment – visual axis alignment
1
|| = 0.02 mm/m (mils/inch)
Position the laser launch in
one corner of the surface.
5
|| = 0.02 mm/m (mils/inch)
Move the M unit to X1 YMAX.
XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Coaxiality
2
X AXIS
|| = 0.02 mm/m (mils/inch)
Mark out your grid on the
surface to be measured.
AVOID EXPOSURE
Laser light is
emitted from
this aperture
6
AVOID EXPOSURE
Laser light is
emitted from
this aperture
|| = 0.02 mm/m (mils/inch)
Align the beam onto the centre of the
target by rotating the sweeping beam for
horizontal alignment and use the pitch/
yaw adjusters for vertical alignment.
Squareness
Spindle direction
3
|| = 0.02 mm/m (mils/inch)
Move the M unit to X1 Y1.
7
|| = 0.02 mm/m (mils/inch)
Move the M unit to XMAX Y1.
4
AVOID EXPOSURE
Laser light is
emitted from
this aperture
AVOID EXPOSURE
Laser light is
emitted from
this aperture
Adjust the height of the M unit on the pillars so that
the beam aligns with the centre of the target.
8
|| = 0.02 mm/m (mils/inch)
Align the beam onto the centre of the
target by rotating the sweeping beam for
horizontal alignment and use the pitch/
yaw adjusters for vertical alignment.
www.renishaw.com/xk10
Repeat
steps 3-8
until beam
remains on
the centre of
the target in
all locations
AVOID EXPOSURE
Laser light is
emitted from
this aperture
AVOID EXPOSURE
Laser light is
emitted from
this aperture
79