Renishaw XK10 Manual page 92

XK10 Hardware XK10 Software
Flatness Level Level
Data capture
1
Select 'Values'.
4
Remove the target from the M unit,
zero the laser reading and capture the
first point. This is now the reference.
92 XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Coaxiality
2
Mount the M unit at first
measurement position.
5
|| = 0.02 mm/m (mils/inch)
Move to all positions of interest
and capture points.
Squareness
Spindle direction
|| = 0.02 mm/m (mils/inch)
Adjust the height of the M unit on
the pillars so that the beam aligns
with the centre of the target.
NOTE: Use the live readings from
the software to adjust the machine
level where required.
NOTE: The V values are the
difference between the measured
position and the reference.
3
AVOID EXPOSURE
Laser light is
emitted from
this aperture
AVOID EXPOSURE
Laser light is
emitted from
this aperture
www.renishaw.com/xk10