Renishaw XK10 Manual page 111

XK10 Hardware XK10 Software
Flatness Level
Measure the reference rail
30. Position the M unit at the first
measurement position.
31. Capture all positions on
the structure by moving the
M unit to each position and
pressing either orange button
to capture the error.
XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Parallelism Coaxiality
NOTE: The launch unit is now aligned to the reference rail. To maintain this reference, it is vital
that the launch unit is not adjusted or moved in any way for the remainder of the test process.
Squareness
Spindle direction
www.renishaw.com/xk10 111