Renishaw XK10 Manual page 139

XK10 Hardware XK10 Software
Flatness Level
Mounting the hardware – best practice
Check that the tilting plate is
in the central position.
Check that the launch unit
and receiver are square to
each other.
XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Coaxiality
|| = 0.02 mm/m (mils/inch)
Adjustments can be made to
the tilting plate using the pitch/
yaw adjusters.
Adjust the M unit until it is
square with the launch unit.
Squareness
Spindle direction Spindle direction
Adjust until
the tilting plate is in the
nominal position.
Check that the S unit and M
unit are square to each other.
Adjust the M unit until it is
square with the S unit.
www.renishaw.com/xk10 139