Renishaw XK10 Manual page 98

XK10 Hardware XK10 Software
Flatness Level
Levelling
the launch
unit to the
casting
NOTE: Select the launch orientation icon
to change the reference rail/location of the
launch unit.
98 XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Parallelism Coaxiality
3. Position the
M unit so the beam hits
the centre of the target.
5. Input the parameters for the test set-up.
Select the green arrow.
Squareness
Spindle direction
4. Load the parallelism option
– select the horizontal mode.
6.
Select the 'show target' view, remove
the target from the M unit and zero
the laser reading.
www.renishaw.com/xk10