Renishaw XK10 Manual page 101

XK10 Hardware XK10 Software
Flatness Level
Positioning the pentaprism
10. Mount the pentaprism in a
suitable position so that the
output aperture is facing down
the reference rail.
• The pentaprism should be
> 300 mm from the output
aperture of the launch unit.
• Visually align the pentaprism
so it is square to the structure/
launch unit.
• Ensure the arrow on the front
of the pentaprism is pointing
down the axis of measurement.
11. Position the pentaprism so that
the beam from the launch unit
hits the centre of the mirror/
target (with the mirror covering
the input aperture of the
pentaprism).
XK10 alignment laser system
XK10 Applications XK10 Applications Straightness
Parallelism Parallelism Coaxiality
Squareness
Spindle direction
www.renishaw.com/xk10 101