Genset Controller Basic Actions; About Operation Of The Genset Controller; Genset Controller Buttons - Deif GPC 300 Operator's Manual

3.2

GENSET controller basic actions

3.2.1

About operation of the GENSET controller

A system can include a number of GENSET controllers that work together to ensure effective power management.
Normal operation
The GENSET controller is usually in LOCAL mode.
The controller can operate in REMOTE mode or LOCAL mode, and in Switchboard control.
3.2.2

GENSET controller buttons

1
No. Item Notes
1 Genset
Start genset and start sequence. *
2 Breaker
Close breaker : Starts close sequence. *
3 Options
REMOTE mode : Change to REMOTE if possible. *
LOCAL mode : Change to LOCAL if possible.
NOTE * Only in LOCAL mode. In REMOTE or Switchboard control the controller ignores the input.
OPERATOR'S MANUAL 4189341171C UK
2
3
Stop genset and stop sequence. *
Open breaker : Starts open sequence. *
Off : Controller not in REMOTE.
Green : Controller in REMOTE.
Off : Controller not in LOCAL.
Green : Controller in LOCAL.
Page 21 of 91