Single Genset With Mains Breaker Controller Buttons - Deif GPC 300 Operator's Manual

3.1.4

SINGLE genset with mains breaker controller buttons

1
No. Item
1 Genset
2 Generator breaker
3 Mains breaker
4 Options
NOTE * Only in LOCAL mode. In REMOTE or Switchboard control the controller ignores the input.
OPERATOR'S MANUAL 4189341171C UK
2
Notes
Start genset and start sequence. *
Close breaker : Starts close sequence. *
Close breaker : Starts close sequence. *
REMOTE mode : Change to REMOTE if possible.
*
LOCAL mode : Change to LOCAL if possible.
3
4
Stop genset and stop sequence. *
Open breaker : Starts open sequence. *
Open breaker : Starts open sequence. *
Off : Controller not in REMOTE.
Green : Controller in REMOTE.
Off : Controller not in LOCAL.
Green : Controller in LOCAL.
Page 16 of 91