Installation
Traditional Logs 1400LSKV2
Material required
• Traditional logs kit, which contains:
• 8 logs
• 4-piece ceramic plaque
• 1 center emberbed
• Gloves, if desired (not supplied)
H68
H69
H46
H44
H53
Installation
Carefully unpack the kit. Identify each log according to
the above image.
Ceramic Plaque
1. Place the front right ceramic piece of the plaque on
the burner cover.
H70
H71
H47
H45
2. Place the front left ceramic piece.
3. Place the rear left ceramic piece.
4. Place the rear right ceramic piece.
Ceramic plaque installed
Logs
Please note that the position of the logs is critical to
ensure the proper performance of the appliance.
1. Place ember bed H53 onto the burner. Carefully
locate it centered left to right and front to back.
H53
Fuel Beds
57