Maintenance And Service - XYZ Printing da Vinci Pro EVO User Manual

the steel wires or that remained in the feed hole with the Nozzle in order to remove the residual
debris.
* Filament should be unloaded from the extruder module before cleaning the feeding path.
* Care should be taken during the operation to avoid potential burn injuries.
Filament scraps generated during printing may remain on the feeding motor and gear,

which will affect the printing quality and operation of the printer. In this case, please clean
the scraps.

Maintenance and Service

If an abnormal sound is heard from the Z-axis when the machine is operating, please apply

grease to protect the machine.
When the printer needs to be serviced during the term of the warranty, it is recommended

that the machine is packed with original packaging materials prior to shipment. For this
purpose, the packaging materials are better to be kept. If other packaging materials are
used instead, the printer might be damaged during printing. We reserve the right to assess
relevant service fees.
Unpacking and Installation
Unpacking
Please follow the instructions to unpack the product. Failure to follow the procedure may result
in damage to parts.
1. Open the outer box to pull it out.
2. Remove the cushions of accessories on the upper two sides and all fixing materials at the
front and rear.
7