Maintenance; Filtering Resin In The Tank; Preservation Of The Uncured Resin - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

MAINTENANCE

Filtering resin in the tank

Uncured resin in the tank can be left for the next print
if you are not change to other material. However,
cured debris may be left in the resin. To ensure the
printing quality, be sure to filter the resin and pour it
back to the tank before the next print.
*If you need to change to other materials for printing, it is recommended to replace with a new resin tank.

Preservation of the Uncured Resin

Avoid exposing uncured resin to the air for long
periods of time. The uncured resin can be stored in an
opaque container after it is filtered. Pour the resin
back into the resin tank prior to the next printing.
52