XYZ Printing da Vinci Pro EVO User Manual page 37

Laser Engraver Module (Optional)
For this model, engraving function can be achieved by the "laser engraving module", which can
only be installed on this model.
The laser engraving function can be started after the laser engraving module is installed.

To ensure safety, do not open the front cover during the whole process of laser engraving;

engraving will be automatically suspended when the front cover is opened.
Before the operation, use, disassembly or replacement of the product, please read the safe use
instructions of the laser engraving module provided in the user manual carefully, and follow the
safety precautions.
Specifications
Engraving area
Laser wavelength
Engraving power
Laser engraving software
Supported image formats .jpg / .png / .gif /.bmp
Laser power type Class 3B
Users may use the attached USB drive, or access the official website of XYZprinting
http://www.xyzprinting.com/ to download and install XYZmaker Suite, and start "XYZengraver".
For more details of the laser engraving module, please refer to the instructions attached.
22 cm x 20 cm
406 nm + 8 nm/-6 nm InGaN
350 mW ± 10%
XYZengraver
37