Table of Contents
Advertisement
Printing
After loading the filament, you may start the printing process with the following method.
• Start the software printing using the USB cable.
Use the USB cable to connect the printer to the computer, and open the software XYZprint 3.
"Ready" appears in the software, indicating that the USB connection is successful.
Click "Control Panel" (DASHBOARD) to monitor the printer or click "PRINT" to print files.
• USB drive
Save the sliced graphical file (.3cp) in the USB drive. After that, you may insert the drive into
the USB slot to access the USB printing function.
• Wi-Fi
Please make sure that the Wi-Fi d ongle has been plugged into the US B port on the top of the
printer
* Refer to 3-3 Network for the operation of WiFi connection.
Printing screen
Click the "filament data button" on the screen to check filament status, or click this button
(filament data button) to access the "replace filament" function when there is a reminder of
insufficient filament.
In case of warped bottom / adhesion
failure of printed objected, it is
recommended to use glue stick to
increase adhesion. Or stick masking
tape on the metal bed before gluing.
34
Advertisement
Table of Contents
