Table of Contents
Advertisement
3-11. Legal Info
4.
Maintenance
4-1.
Calibration
When the calibration starts, the print bed rises and the nozzle moves to the test point in
sequence for measurement. After measurement, the screw will be driven to adjust and
complete the levelness adjustment of the print bed.
4-2.
Z-offset
Wait for the extruder module to automatically move to the adjusted position, check the
distance between the nozzle and the print bed after positioning, and then evaluate the
height of Z axis to be adjusted. Click the icon on the screen to adjust the up and down of
the print bed. The higher the value is, the longer the distance is, and the lower the value
is, the shorter the distance is. It is recommended to adjust the nozzle to the position
touching the print bed.
Click "Apply" to save the settings after adjustment.
* For the operations of Calibration and Z-offset, please refer to 3-1. Print-Bed.
29
Advertisement
Table of Contents
