XYZ Printing da Vinci Pro EVO User Manual page 22

(2) Jog Mode
The Jog Mode is for manual control of the positions of X, Y and Z axes. Test the
smoothness of movement.
The system will automatically reset the extruder module (home axes) when users enter
the Jog Mode.
Select the moving direction and distance of extruder module or print bed:
Select "Move print head module left and right "(direction of X axis).

Select "Move extruder module forward and backward" (direction of Y axis).

Select "Move print bed up and down" (direction of Z axis).

Back to home: for reposition.

Users may also enter the distance setting through the figure at the top right to adjust
the moving value (1~20mm).
(3) Calibration
Adjust the levelness of the print bed to keep the bed flat to ensure printing quality.
22