XYZ Printing da Vinci Pro EVO User Manual page 19

Wait for the extruder module to be heated to the working temperature after confirming
that the filament is loaded, which will be driven by the feeding system to push the extruder
module along the filament tube; or directly press and hold the "up" key to speed up the feeding.
Press "DONE" anytime if you find filament is comes out of print head.
When the loading operation is complete, tap to "YES" confirm.
2-2 Unload filament: Filament > Unload
When the print head has been warmed up to working temperature, the feeding motor will
eject the filament.
Press "DONE" if you find filament is ejected from the feed module.
When the unloading operation is complete, tap to "YES" confirm.
19