Table of Contents
Advertisement
3-1. Print-Bed:
It is recommended to perform "Calibration" before printing, and then complete "Z-Offset"
to ensure the level of the print bed and the optimum printing distance between the print
head and the print bed.
Please make sure the print bed is clear.
(1) Z-Offset
When the printing bed is calibrated, perform the vertical calibration of Z-offset to ensure
the print head can eject onto the printing bed smoothly.
Wait for the extruder module to automatically move to the adjusted position, check the
distance between the nozzle and the print bed after positioning, and then evaluate the
height of Z axis to be adjusted. It is recommended to adjust the nozzle to the position
touching the print bed. Click "Apply" to save the settings after the adjustment.
21
Advertisement
Table of Contents
