Operating The Printer - XYZ Printing da Vinci Pro EVO User Manual

Hard material If there is no flow or abnormal sound, try
to loosen or tighten until the abnormal
sound is eliminated and the filament flows
out stably.
Non-rigid When extruding the filament from the
material, print head, please check if any scraped
not hard debris remains in the gear-clamping area.
wearing, If the filament cannot be extruded or if an
Fiber material abnormal sound is heard, you may loosen
or tighten the gear until the sound stops
and the print head is steadily extruding
the filament.
* If the gear of the feed module is loosened, you may execute the adjustment. In this case, the gear of the
feed module should be tightened correctly.
* Specific conditions may exist in the filaments supplied by different manufacturers. Please make the
adjustment according to the conditions of the filament that will be used.

Operating the Printer

Setting the language shown on the printer screen before use, and through the Quick Tour to
quickly understand content of each function of the main screen.
You can also select "Qui Tour" in the "Settings" function later to learn about the various
functions. In order to ensure the print quality, please perform maintenance according to the
reminder items first to exclude reminder symbols.
If there is abnormal sound,
turn the nut leftward until
tight (adjust in a
counterclockwise
direction) or turn the nut
rightward to loosen (adjust
in a clockwise direction)
Clockwise to loosen
16
Middle left or middle right
Middle left