JRC JMR-7230-S Instruction Manual page 531

The descriptions of settings are shown in the table below.
Setting Item
Type Select an own ship symbol from the combo box (symbols
of other ships are also linked).
*In Auto, the display is switched between Outline and
Minimized Symbol depending on the size of the symbol.
When the beam side of the Outline symbol is 3mm or
more, the symbol is displayed in Outline and when the
symbol is less than 3mm, it is displayed in Minimized
Symbol.
Heading and Selecting this enables to display heading lines and beam
Beam Line lines.
(Heading
Note
line/beam line
This item can only be set on the ECDIS screen.
display)
Stern Line Selecting this enables to display a stern line.
Note
This item can only set in the RADAR screen.
Ground Stabilised Selecting this enables to display a ground stabilised
Vector vector.
Sea Stabilised Selecting this enables to display a sea stabilised vector.
Vector
Time Enter the own ship's vector length in the box.
(Length of own
ship's vector)
Stabilization Selecting this enables to display the stabilization
Indicator indicator.
Note
When both the Ground Stabilised Vector and the Sea
Stabilised Vector are effective, this automatically takes
effect.
Vector Time Mark Selecting this enables the interval of the vector time
mark.
Description of Setting
: Auto
: Simplified Symbol
: Outline
: Minimized Symbol
The beam side is 3mm or more
16-9
Setting Value
For RADAR:
AUTO
Outline
Minimized Symbol
[default]
For ECDIS:
Simplified Symbol
[default]
Outline
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
0 to 120
To enable: Select.
To disable: Clear.
To enable: Select.
To disable: Clear.
Section 16 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録