JRC JMR-7230-S Instruction Manual page 226

[1] [Show ETA]
By selecting the [ETA] check box, the display of the ETA (estimated time of arrival to WPT) becomes
effective at route monitoring.
When [UTC] from [Format] is clicked, UTC is displayed and when [LMT] is clicked, LMT is displayed.
Not selecting the [ETA] check box
Selecting the [Show ETA] check box, and clicking [UTC] as the arrival time display format
Selecting the [Show ETA] check box, and clicking [LMT] as the arrival time display format
Section 9 Route Planning
[1]
[2]
[3]
9-4